Used Cushion Tire Forklift Oxnard - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. Cushion tires cost less to make and are easier to take care of. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires also allow the forklift to sit closer to the ground. The advantage of a lower forklift is the increased vertical clearance when compared to forklifts with pneumatic tires. However, cushion tires do not provide as much traction as pneumatic tires. This is especially true for outdoor areas and wet surfaces.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The main difference with these categories is that the standard air pneumatic tires consist of a layered rubber design filled with air and the solid resilient pneumatic type is made completely out of rubber.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Forklifts that use cushion tires are a wise option for interior and exterior locations that feature smooth surfaces. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. Warehousing applications and manufacturing facilities often rely on cushion tire forklifts. Work which requires forklift operations in tight areas, such as narrow aisles, are ideal for the use of a cushion tire forklift.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Since cushion tire forklifts do not need to house a larger internal combustion engine, they are more compact and easier to maneuver.
2) Lower Clearance
Indoor cushion tire forklifts have lower clearance compared to pneumatic models; allowing the machine to travel easier through doorways and around lights or sprinkler obstacles.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Cushion tire forklifts are more environmentally friendly as they use electricity and produce no harmful emissions, compared to internal combustion engine models.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
There are many work applications suitable for using cushion tire forklift models. If most of the transporting, lifting loads and placement happens inside or with limited outdoor use on smooth surfaces, cushion tire forklifts are your best choice.
Cushion tire forklifts typically feature a smaller frame and sit much lower to the ground compared to pneumatic tire models. This compact design facilitates easier clearance through doorways and overhead obstacle avoidance. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Traction style tires will give better traction on rough terrains like asphalt or packed gravel or wet surfaces. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
The smaller turning radius on the cushion tire forklifts is one of their main advantages. Cushion tire forklifts are excellent for manufacturing facilities and warehouse operations that are compact with less space. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are also less expensive and are more readily available than pneumatic tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
The solid pneumatic tire costs more compared to the air pneumatic tire. This is because a solid pneumatic tire is not susceptible to punctures or gouges because they are made of solid rubber and do not have air in them. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. The main issue with air pneumatic tires is their ability to become gouged or punctured. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Since air-filled tires deliver a bouncy sensation, they contribute to operator fatigue and discomfort. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Foam filling is commonly used for flat tire prevention. Filling an air pneumatic tire with foam usually takes approximately 3 days to fill and cure.
Difference in Load Capacity
The load capacity of cushion tire forklifts and pneumatic tire forklifts are about equal. Lift limits are given for certain electric-powered cushion tire forklifts. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. Load capacities come in a wide range - from less than 2,000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
